Ring Measure 戒圍測量
Measure Your Ring size
戒圍測量步驟
戒圍測量步驟
耳環、項鍊和手鍊(環)尺寸，
皆表示於每個產品頁面商品敘述中。
Earrings, necklace, bracelet,
and bangles size are listed on each product page.
-
皆表示於每個產品頁面商品敘述中。
Earrings, necklace, bracelet,
and bangles size are listed on each product page.
-
1. 準備一支尺和一條約0.5cm寬的紙條或一條線。
Prepare a ruler and a slip of paper or a piece of string.
2. 繞一圈在要佩戴首飾的手指底部 。
切記，不要將這條線或紙條收太緊。
再用尺測量這條線或紙條的長度，
將所得周長對照下面的表格就能找到指圍尺寸。
Prepare a ruler and a slip of paper or a piece of string.
2. 繞一圈在要佩戴首飾的手指底部 。
切記，不要將這條線或紙條收太緊。
再用尺測量這條線或紙條的長度，
將所得周長對照下面的表格就能找到指圍尺寸。
Wrap a circle on the bottom of the finger or
wrist where you want to wear the accessories.
Remember, don't tighten this thread or strip
wrist where you want to wear the accessories.
Remember, don't tighten this thread or strip
of the paper too tightly.Then use a ruler to
measure the length of this line or paper,
measure the length of this line or paper,
and follow the provided size chart to find your ring size.
3. 在紙上做記號。
Mark on the paper.
4. 用尺測量相對應長度(mm/公厘)。
測量時需要特別注意使用的單位
請精準到 1 公厘(mm)也就是 0.1 公分(cm)，
因為差了 1mm，戒圍就有可能差一號喔！
Measure with a ruler.
While measuring, please pay extra attention
to millimeters (mm). 1mm difference in the
measurement may result in different ring sizes.
5. 將所得周長對照國際圍規格表
即可找到國際圍尺寸(手腕圍可忽略此步驟)。
Vein Studio 永續首飾戒指尺寸，
皆採國際戒圍為標準。
Accurately determine what ring size you are
in the international sizing standards.
Vein Studio follows the international ring size standard.
6. 獲得適合您尺寸的永續首飾。
Gain the fitting size of rings.
Gain the fitting size of rings.
戒指尺寸對照表 | Size guide for rings :
參考以下圖表對照尺寸。若有任何疑問，
Please take the chart below as a refernece.
If you have any questions, do not hesitate to
contact us before making any purchase.
Please reach us through veinstudioinfo@gmail.com
or simply message us on Instagram.
or simply message us on Instagram.
We are happy to help.
量出手邊戒指的直徑
如果手邊已有大小剛好的戒指，
可以直接將戒指平放用透明的直尺
測量戒址內圈的直徑，再搭配戒圍換算對照表，
同樣能找出自己的戒圍！當然這邊也要再次
提醒大家，測量內圍直徑的單位
必須小到1mm，才會準確。
Using your ring to measure:
If you already have a ring of the right size,
you can directly lay the ring flat and measure the
you can directly lay the ring flat and measure the
diameter of the inner ring of the ring.
Follow the provided chart to find the right size.
Please pay extra attention to millimeters (mm).
1mm difference in the measurement
Please pay extra attention to millimeters (mm).
1mm difference in the measurement
may result in different ring sizes.